Batteries-Chargers-2024-EN

P lug - in charger AL300 P ro The plug-in charger, which is designed for continuous charging/ overwintering of lead-acid batteries, automatically charges your lead-acid battery safely and reliably and prevents harmful deep discharging. As soon as the end-of-charge voltage is reached, the electronic control automatically reduces the charging current. This protects the battery from harmful overcharging. A charge control indicator and a polarity indicator provide information on the correct operating status. Also for maintenance-free lead/lead-gel batteries. With output voltage selector switch for 2V/6V and 12V.Technical data: Operating voltage 230 V/50 Hz, final charging voltage 2.3 for 2 V, 6.9 for 6 V and 13.8 V for 12 V batteries. Charging current max. 300 mA 56 6318 ZENITH C hargers for AGM / S ilicon / G el batteries / O ptima batteries These high-frequency chargers are pre-programmed with regard to the charging characteristic for closed AGM/gel batteries (IUoP). When using lead/acid wet batteries and Optima batteries, we will be happy to change the charging characteristic for you, but this must be speci- fied when ordering. The charging capacity can also be adjusted within specified limits (depending on the charger). However, this is only ne- cessary if it exceeds the battery manufacturer‘s specifications. Despite fluctuating or low input voltage (185 - 265V, 47 - 62 Hz), e.g. at the end of the bridge or behind endlessly long extension cables, the output power is always the same. Thanks to the high-frequency technology, these chargers are light and compact and can be installed in a boat or used as a desktop unit. These devices are equipped with a 2m power input cable with 16A Schuko plug and a 2.5m charging cable (without battery clamp). The operating temperature is -10° to +55°C. A counter voltage of 1V per cell is required to start the charging function. Volt Amp. Order Nr. 12 12 56 7525 12 25 56 7526 24 20 56 7527 48 30 56 7529 These chargers are suitable for lead, calcium/WET, AGM, gel, LiFePO4 (lithium) and start/stop batteries . All chargers are 100% safe and are protected against reverse polarity, as well as being equipped with multi-stage charging to extend battery life. 901270 and 901271 are IP65 waterproof. Input voltage: 220-240V Scope of delivery incl. frog terminals and ring lug adapter This high-frequency system is suitable for lead-acid, AGM and Li-Po4 gel batteries. The charging curve is switched on the LCD screen, which also displays the charging current, voltage, charging time, etc. It is protected against reverse polarity, short circuit and overvoltage, IP30. Scope of delivery incl. 230V plug and Anderson connector. Quick Power terminals 901115 are optionally available. Dimensions: 180x310x100mm, 3.5kg ECOBAT - L adegeräte Volt max. Charging current for batteries Order Nr. 6 / 12 V 4 Amp. Blei, AGM, Gel 90 1270 12 V 8 Amp. Blei, AGM, Gel 90 1271 12 / 24 V 16 / 8 Amp. Blei, AGM, Gel, LiFePO4 ++ 90 1272 12 / 24 V 25 / 12,5 Amp. Blei, AGM, Gel, LiFePO4 ++ 90 1273 Volt max. Charging current Order Nr. 12-48 V 15 - 30 Amp. 90 1287 ++ only 12V possible with LiFe PO4 batteries ++ not IP65 waterproof! C hargers for L i F e PO4 batteries These lithium FePO4 battery chargers are waterproof to IP65. Input voltage: 100 - 240V Volt max Charging current LxWxH mm Weight Order Nr. 12 V 5 Amp. 120 x 69 x 45 0,7 kg ++ 56 7583 12 V 10 Amp. 220 x 90 x 54 1,5 kg 56 7585 24 V 7 Amp. 210 x 90 x 52 1,5 kg 56 7584 24 V 12 Amp. 265 x 93 x 55 2,8 kg 56 7586 36 V 8 Amp. 265 x 93 x 55 2,2 kg 56 7587 CBHF2-M 12-15, CBHF2-M 12-20, CBHF2-M 12-25, CBHF2-M 12-30 CBHF2-M 24-15, CBHF2-M 24-20, CBHF2-M 24-25, CBHF2-M 24-30 CBHF2-M 36-15, CBHF2-M 36-20, CBHF2-M 36-25 CBHF2-M 48-15, CBHF2-M 48-20 CHARGERS 6